Epson RC620 CU - Page 101

Setup & Operation 14. Option : Teach Pendant TP1
RC620 Rev.8 85
AUTO mode
Print Window
13.4.1 Program Command Display
I/O
Monitor
13.4.2 I/O Monitor
Memory I/O Monitor
13.4.3 Memory I/O Monitor
Task Monitor
13.4.4 Task Monitor
System History
13.4.5 System History
Controller Statuses
Preservation
13.4.6 Controller Statuse
s Preservation
Date / Time
13.4.7 Data / Time
Brightness / Contrast
13.4.8 Brightness / Contrast
Language
13.4.9
Language
Error
13.4.10
Error
NAME
: Screen
name
: Reference section
Switch Operation Mode
Change the TEACH mode and AUTO mode with the mode selector key switch on the
Teach Pendant.
TEACH mode
Turn the mode selector key switch to “Teach” for TEACH mode.
Pauses
the executing program when operation mode is switched to
TEACH mode.
The operating Robot stops by Quick Pause.
AUTO mode
Turn the mode selector key switch to “Auto” and change the latch
release input signal to ON position for AUTO mode.