Maintenance 6. Maintenance Parts Replacement Procedures
RC620 Rev.8 157
6.3 Motor Driver
6.3.1 Part Name
Input/Output signal connector
50 W, 100
W, 200 W, 400 W
750W (with Dynamic brake resistor cable)
For the wattage of the motor driver, see the model type described on the face plate.
Also, the wattage of the installed motor driver corresponds with the wattage of the driving
motor.
JUSP-SU021A*
50 W
JUSP-SU028A*
100 W
JUSP-SU065A*
200 W
JUSP-SU085A*
400 W
750 W
TTCA-021A 50W
TTCA-085A 400W
* This means one alphanumeric letter.