EUCHNER MSC - 9.1.8. Tool windows for ITEMS, OPERATOR, CONFIGURATION; 9.1.7.1. Changing configuration (layout of the various modules); 9.1.7.2. Editing user parameters

English
Configuration LOG

The creation date and the CRC (four-digit hexadecimal code) for a project saved
in the MSC-CB are contained in the configuration file (project).

Up to five sequential events can be recorded in this log. Then the results are over-
written starting with the oldest event.
The log file can be displayed using the button on the default toolbar (password re-
quired: level 1).
Figure 40