CHAPTER 12
PAGE 9
PAGE DATE: 14. August 2015
MAINTENANCE MANUAL EXTRA 330LX
Recommended Viscosity of Engine Oil:
Average Ambient
Air Temperature
MIL-L-6082 or
SAE J1966 Spec.
Mineral Grades
MIL-L-22851 or
SAE J1899 Spec.
Ashless Dispersant
Grades
All Temperature ----------
SAE 15W50 or
SAE 20W50
Above 27°C (80°F) SAE 60 SAE 60
Above 16°C (60°F) SAE 50 SAE 40 or SAE 50
-1°C (30°F) to 32°C (90°F) SAE 40 SAE 40
-18°C (0°F) to 21°C (70°F) SAE 30
SAE 30, SAE 40 or
SAE 20W40
-18°C (0°F) to 32°C (90°F) SAE 20W50
SAE 20W50 or
SAE 15W50
Below -12°C (10°F) SAE 20
SAE 30 or SAE
20W30
N O T E Refer to latest revision of Lycoming Service Instruc-
tion No. 1014 for further information.
Replenish engine oil as follows:
1 Open the hatch on the upper part of the cowling and
unscrew oil filler cap.
2 Using a clean paper towel wipe any oil foreign material
from the edges of the oil filler tube opening. Also wipe oil
from the dipstick.
3 Pour oil of proper specification and viscosity into oil filler
tube to achieve desired oil level.
4 Reinstall oil filler cap with dipstick and tighten finger
tight. Close the hatch on the upper part of the cowling.
REPLENISHING
Replenishment of Engine Oil
To Next Page
Loading...
