CHAPTER 73
PAGE 7
MAINTENANCE MANUAL EXTRA 330LX
PAGE DATE: 1. March 2011
Installation
Install in reverse sequence of removal observing the following
items:
1 Thread the intercom switch (5b, figure 3) and the smoke
switch (5a) wiring through the throttle control lever (5)
before mounting the lever to the attachment bracket.
2 Tighten the throttle control lever castle nut (7) slightly.
Ensure movability of control levers (1 & 5).
Rigging
1 Move the rear throttle control lever (5, figure 3) in idle
position parallel to the adjoining fuselage structure steel
tube (as shown in figure 3).
2 Check throttle lever (1, figure 4) of the fuel injector servo
reached travel stop for closed throttle.
3 Check usable stroke of control cable. The over-travel of the
control cable in retracted and extended position shall be 8
to 13 mm [5/16"-1/2"]. Ref. to figure 2 of Chap. 20-10-09.
1
2
4
3
Figure 4 Throttle Control Cable Rigging
PAGE DATE: 13. September 2013
To Next Page
Loading...
