CHAPTER 12
PAGE 17
PAGE DATE: 1. March 2011
MAINTENANCE MANUAL EXTRA 330LX
12-30-00 UNSCHEDULED SERVICING
12-30-01 Removal of Snow and Ice
After snowfall, the snow should be removed immediately
from the surfaces of the aircraft. Otherwise the water formed
from melted snow will freeze on the surface or in slots and
gaps of fairings.
N O T I C E Do not use sharp tools for removing the snow.
If the aircraft shows sign of ice formation, it is recom-
mended to defrost indoors. Remove as much snow as pos-
sible with a soft bristle boom, make sure the wheels and
brakes are clear, and tow the aircraft into a room with
elevated temperature. This method is particularly desirable,
since it will melt any undetected ice and snow that could
constitute a flight hazard.
To Next Page
Loading...
