Extra 300LX - 03-10-00 DESCRIPTION; 03-10-01 Construction; 03-10-02 Flight Control System

CHAPTER 3
PAGE 4
PAGE DATE: 1. March 2011
MAINTENANCE MANUAL EXTRA 330LX
03-10-00 DESCRIPTION
03-10-01 Construction
Manufacturer: EXTRA-Flugzeugproduktions- und
Vertriebs- GmbH
Flugplatz Dinslaken
D-46569 Hünxe, Germany
Fuselage: steel tube design, covered with
fabric, composite material resp.
aluminium sheet metal,
single piece canopy side hinged
Wing: fibre composite design
Stabilizers : fibre composite design
Landing gear: 2 main wheels, 1 tail wheel, fibre
composite strut design
Seats
Rear Seat: Seat angle and seat back rest adjust-
able, 5 piece harness
Front seat: non-variable position, 5 piece
harness
03-10-02 Flight Control System
Pitch control: push-pull rods
Roll control: push-pull rods
Yaw control: cable system
Pitch trim: trim tab on the right elevator,
Bowden cable, electrical trim-
servo, trim switch, trim position
indicator