CHAPTER 24
PAGE 7
PAGE DATE: 1. March 2011
MAINTENANCE MANUAL EXTRA 330LX
Placing the ALTERNATOR switch in the ON-position will
energize the alternator solenoid which provides a circuit
from the bus bar to the alternator. The voltage regulator will
supply and control the excitation current to keep the output
voltage of the alternator constant under varying output cur-
rent requirements.
With the alternator power available, the battery will be
charged from the bus bar. The ammeter, which is in series
with the battery and the bus bar will indicate the current flow
to the battery (positive values). When the battery reaches a
state of full charge, the ammeter will show an indication near
"0".
24-30-21 Alternator
Instructions given below are only applicable for Bosch,
Prestolite and Plane Power alternators included in the type
design.
To Next Page
Loading...
