FAAC A1000 - SDK EVO Users Guide; 23.3 Selection Menu Navigation; 23.4 Password Management

A1000 111 532210 04 - Rev.A

SDK EVO USER’S GUIDE
23.3 SELECTION MENU
1. To access the operating mode selection menu, press the cor-
responding button on the HOME PAGE.
2. With the selection buttons you can set:
- the Automatic or Door open operation
- Two-directional or Exit only mode
- Total or Partial Opening option
3. To go back to the HOME PAGE use the OK button (the selections
displayed are confirmed).
Automatic or Door open operation
Automatic = opening via detector
Open door = closure is inhibited
Automatic

Door open
Direction of travel
Two-directional = the detectors are
enabled for entry and exit
Exit only = the detector is only ena-
bled for exit
Entry only = the detector is only
enabled for exit
Two-direc-
tional


Exit only

Entry only

Opening percentage
100% = Total opening
% = Partial opening (percentage that
can be modified by the program)
Total opening
100%
Partial opening
%
example - automatic operation, only for exit, with partial Opening:


%
example - door open with total opening:
100%
23.4 PASSWORD
The 4 digit PASSWORD has to be entered in order to use some
of the functions.
- select the first digit using the
↑
↓
buttons
- confirm via the OK button and it moves on to the next digit
- once the 4 digits have been entered, the password is recognised
by the device as OPERATOR or INSTALLER.

The factory-set password is: 0000



100% OK
operation selection:
Automatic/Door Open
OK - go back to the HOME PAGE (con-
firm the current selections)
selection:
Two-directional/Exit only
selection:
Total/Partial Opening
Summary of current selections
Menu title
OPERATING MODE
AUTO BIDIR TOTAL
Icons of current selections
operating for example in: automatic /
two-directional / with total opening
HOME PAGE
14:30
A1000
THUR 20/03/14
AUTO BIDIR TOTAL
14:30
system data and current statuses
icons in Home Page
A1000 THUR 20/03/14
AUTO TWODIR TOTAL