Power line connection
POWER LINE CONNECTION
Choke
6.
Ref.2003
· 211 ·
QC-PDS
HARDWARE
Changing the orientation of the chassis support
Connecting the chassis to ground protection
Selection
Table T. H6/5 indicates the appropriate CHOKE for the main regenerative
power supply model installed in the system.
For more information on the technical data of the CHOKES, see section,
4.2 CHOKES. Also refer to its dimensions in section, 11.9 CHOKES.
F. H6/8
CHOKE RPS-160. Orienting the chassis support.
F. H6/9
CHOKE RPS-160. Chassis to ground protection.
T. H6/5
Selecting the CHOKE.
POWER SUPPLY CHOKES
QC-PS-025
Not applicable
QC-PS-045
Not applicable
QC-RPS-030-F
CHOKE RPS-45
QC-RPS-160-
CHOKE RPS-160
1. LOOSEN THE FOUR M3x8 SCREWS
2. ROTATE THE CHASSIS SUPPORT 180 ° AND
TIGHTEN THE FOUR M3x8 SCREWS
TURN THE CHASSIS SUPPORT 180º TO MAKE THE CONNECTION OF THE
SHIELDS EASIER AND BETTER SETTLE THE CABLES
0.7 N·m
S/2
t
PE
M8 SCREW OF
PROTECTIVE
EARTH
CHASSIS TO PROTECTIVE EARTH
TO THE
PROTECTIVE
EARTH CENTRAL
POINT
To Next Page
Loading...