Use the HDR OTDR
Settings for HDR OTDR Tests
255
3 On the TEST SETUP screen, tap the panels to change settings
for the test. See Table 9.
4 On the TEST SETUP screen, tap SAVE when your test setup is
completed.
5 On the CHANGE TEST screen, make sure the button next to the
test is selected, then tap USE SELECTED.
Note
For all Test Types
except FaultMap and
FiberInspector, you can use the SETUP button on the
TRACE screen to change some OTDR settings
manually after a test. See “How to Quickly
Change OTDR Settings After a Test” on page 277.
Table 9. Settings for HDR OTDR Tests
Module
Select the OTDR module you will use.
To select a different module, tap the Module panel on the
TEST SETUP screen, then tap a module.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
