Fluke Versiv Series - The CABLE ID SETUP Screen

Versiv Series Cabling Certification Product Family
Users Manual
332
1 Install the latest version of LinkWare PC software on the PC.
2 Turn on the tester and
start LinkWare PC on the PC.
3 Use the USB cable supplied to connect the Micro USB port on
the tester to a type A USB port on the PC. See Figure 126.
Or connect a USB flash drive to the PC.
4 On the LinkWare PC toolbar, click , then select a product,
or select Test Files (.tst) to upload from a flash drive.
5 In the Import dialog box in LinkWare PC, select options for
the location and the number of results to import.
GPU46.EPS
Figure 126. How to Connect the Tester to a PC
Micro USB
port
Type A
USB port
AC adapter
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com