Certify Twisted Pair Cabling
Connectors, Keys, and LEDs
33
Connector for a link interface adapter
DSX-8000 modules have a recess for the tabs on Cat 8/Class I
adapters. You cannot attach Cat 8/Class I adapters to
DSX-5000 modules.
RJ45 jack for communications between the main and remote
testers when you do alien crosstalk measurements. See
“About the AxTalk Analyzer Kit” on page 73.
PASS LED comes on when a test passes.
TEST LED comes on during a test.
FAIL LED comes on when a test fails.
TALK LED comes on when the talk function is on (
). The LED
flashes until the main tester accepts the request to talk.
TONE LED flashes and the tone generator comes on if you press
when a main tester is not connected to the remote.
LOW BATTERY LED comes on when the battery is low.
The LEDs also have these functions:
• Battery gauge (see Figure 1 on page 17)
• Volume indicator for the TALK function
• Progress indicator for software updates
: Starts a test. Turns on the tone generator if a main
tester is not connected to the remote.
: Power button. The LED in the power button shows the
status of the battery charging process. See Table 2 on
page 15.
: Press to use the headset to speak to the person at
the other end of the link. Press again to adjust the volume. To
turn off the talk function, hold down .
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
