6.5 SX Bus Interface Card
6-93
Chap. 6
CONTROL OPTIONS
(MSB) (LSB)
15 14 … … 10
%IW***．0 Speed setting 4/Frequency command monitor
%IW***．1 Torque command 2
%IW***．2 Torque current command (final)
%IW***．3 Magnetic flux command (final)
%IW***．4 Actual speed (detected)
%IW***．5 Control data (CW) (Standard ＋DIOA, 16 bits)
%IW***．6 Operation status (SW)
%IW***．7 Speed setting 1/Frequency command (for V/f)
%IW***．8 Line speed input
%IW***．9 Pulse train position command (PG (PR))
%IW***．10 Position detection (internal or PG (PD))
%IW***．11 Position detection (PG (PD) Z-phase input)
%IW***．12 Position command
%IW***．13 VG DI (DIOB option: 16 bits)
%IW***．14 FRENIC-VG Ai (Ai1)
%IW***．15 FRENIC-VG Ai (Ai2)
%IW***．16 VG Ai (AIO/AI option, Ai3)
%IW***．17 VG Ai (AIO/AI option, Ai4)
%IW***．18 Polling function code 1 address
%IW***．19 Polling function code 1 data
%IW***．20 Polling function code 2 address
%IW***．21 Polling function code 2 data
Note: *** represents the SX bus station address set by "RSW1" and "RSW2".
Figure 6.5.20
FRENIC-VG
⇓
MICREX-SX
To Next Page
Loading...
