6-94
(MSB) (LSB)
15 14 … …10
%QW***．22 Speed setting 1/Frequency command (for V/f)
%QW***．23 Torque command 1
%QW***．24 Torque current command
%QW***．25 Magnetic flux command
%QW***．26 Control data (CW)
%QW***．27 VG DO1 (standard＋DIOA: 13 bits)
%QW***．28 Acceleration time
%QW***．29 Deceleration time
%QW***．30 Torque limiting value level 1
%QW***．31 Torque limiting value level 2
%QW***．32 Speed setting 4/Frequency command (for V/f)
%QW***．33 Torque command 2
%QW***．34 Torque bias
%QW***．35 Speed supplement command
%QW***．36 Actual speed (simulated)
%QW***．37 Selecting function code 1 address
%QW***．38 Selecting function code 1 data
%QW***．39 Selecting function code 2 address
%QW***．40 Selecting function code 2 data
%QW***．41 Polling function code 1 address
%QW***．42 Polling function code 2 address
%QW***．43 VG DO2 (DIOB option: 10 bits)
%QW***．44 FRENIC-VG AO (AO1)
%QW***．45 FRENIC-VG AO (AO2)
%QW***．46 FRENIC-VG AO (AO3)
%QW***．47 FRENIC-VG AO (AIO option, AO4)
%QW***．48 FRENIC-VG AO (AIO option, AO5)
%QW***．49 Dynamic SW1
%QW***．50 Dynamic SW2
Note: *** represents the SX bus station address set by "RSW1" and "RSW2".
Refer to "6.5.8 Transmission Format" for the transmission format.
Figure 6.5.21
MICREX-SX
⇓
FRENIC-VG
To Next Page
Loading...
