Fuji Xerox DocuCentre 9000 User Manual

10 Setups
352
Setups
10
Scan Defaults
Set the default values for the scanner feature. When the power is turned on or the
machine returns from a power-saving state, or when the <Clear All> button is pressed,
the system returns to the defaults set here. By setting the defaults to commonly used
features, you can reduce the number of setting operations required in use.
The values set become valid after the power has been turned off and on again.
1 Select [Scan Defaults].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
• The screen at right is from
DocuCentre 9000.
3 Set the setting value.
4 Select [Save].
Output Color
Set the default value for [Original Type] in the [Image Quality] screen.
Note • This feature is only supported by DocuCentre 9000 with Scanner.
Original Type
Set the default value for [Original Type] in the [Basic Scanning Tab] screen.
File Format
Set the default value for [File Format] in the [Basic Scanning Tab] screen.
Lighten/Darken
Set the default value for [Lighten/Darken/Contrast] > [Lighten/Darken] in the [Image
Quality] screen.
Contrast
Set the default value for [Contrast] of [Lighten/Darken/Contrast] in the [Image Quality]
screen.
Note • This feature is only supported by DocuCentre 9000 with Scanner.
Sharpness
Set the default value for [Sharpness] in the [Image Quality] screen.
Auto Exposure
Set the default value for [Auto Exposure] in the [Image Quality] screen.
Background Suppression
Set the default value for [Background Suppression] in the [Image Quality] screen.
Note • This feature is only supported by DocuCentre 9000 with Scanner.

Fuji Xerox DocuCentre 9000 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre 9000
Category	All in One Printer
Language	English