Fuji Xerox DocuCentre 9000 User Manual

4 Scan
158
Scan
4
Scan Size (Specifying a Scanning Size)
You can set the size for the documents to be scanned.
Specify the scan size when scanning non-standard size documents or when making
scans at a size different from the size of the currently loaded document.
When a document size is specified, it is scanned at the specified size regardless of the
size of the loaded document. This feature allows you to scan the document with adding
or deleting the margin.
1 Select [Scan Size].
2 Select a size.
Auto Size Detect
Document sizes are automatically detected. The following shows the sizes being
detected automatically.
Note • When a document size cannot be detected automatically, a message prompting document
size entry appears.
• The document size that can be detected is depended on the [Paper Size Settings] on the
system settings mode. For information on the settings made on the [Paper Size Settings]
screen, refer to "Paper Size Settings"(P.318).
Standard Size
Select a document size from a list of 11 pre-configured types.
Free
Enter the desired scan size when scanning non-standard size documents or when
making copies at a size different from that of the currently loaded document. The size
can be specified in 1 mm increments within the range from 15 to 432 mm for the width
(X) on the document glass and within the range from 15 to 297 mm for the height (Y)
on the document glass. It is convenient if you make the scale in the surroundings of the
document glass reference. Set the size in the document glass X (horizontal) direction
within the range 15 to 432 mm and in the Y (vertical) direction within the range 15 to
297 mm in 1 mm increments. When entering a free size, we recommend using the
scale on the outside of the document glass to help you specify the document size.
Document feeder Document glass
Auto Detect is available
Document size
B5, B5 , B4, A5 , A4,
A4 , A3, 8.5 × 11 inches,
8.5 × 11 inches
, 8.5 × 14
inches, 11 × 17 inches
B6, B6 , B5, B5 , B4, A6,
A5, A5 , A4, A4 , A3, 8.5
× 11 inches

Fuji Xerox DocuCentre 9000 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre 9000
Category	All in One Printer
Language	English