Network Settings
339
Setups
10
3 Select the item to be set or
changed.
Port Settings
Set the interface by which the machine is connected to the client. In [Port Settings], you
can set the following items.
For information about port settings, refer to the Network Administrator Guide.
Protocol Settings
Set the parameters required for communications. In [Protocol Settings], you can set the
following items.
For information about protocol settings, refer to the Network Administrators Guide.
Machine E-mail Address/Host Name
Set the e-mail address and host name for this unit. In [Machine E-mail Address/Host
Name], you can set the following items.
For information about this unit e-mail address/host name, refer to the Network Administrator Guide.
1. USB 7. Salutation 13. Mail Notice Service
2. LPD 8. Port9100 14. UPnP Discovery
3. NetWare 9. SNMP 15.Internet Services (HTTP)
4. SMB 10. FTP Client 16. SOAP
5. IPP 11. Receive E-mail
6. EtherTalk 12. Send E-mail
1. Ethernet Settings 4. TCP/IP - Subnet Mask
2. TCP/IP - Get IP Address 5. TCP/IP - Gateway Address
3. TCP/IP - IP Address 6. TCP/IP - IP Filter
1. E-mail Address
2. Host Name
3. Domain Name
To Next Page
Loading...
Need help?
General
