Setup Menu
383
Setups
10
Login Name
Set the login name when a login name is required to be input by the forwarding
destination server. when [FTP] is selected in [Transfer Protocol] you can enter up to 32
characters for the login name.
When [SMB] is selected in [Transfer Protocol], you can enter up to 97 characters for
the login name as the style below.
z
user name@domain name (user name: up to 32 characters, domain name: up to 64
characters)
Example: fuji@example.com (fuji: user name, example.com: domain name)
z
domain name\user name (domain name: up to 64 characters, user name: up to 32
characters)
Example: example.com\fuji (example.com: domain name, fuji: user name)
Password
When a password is required to be input by the forwarding destination server, set the
password. For the password, you can enter up to 32 characters.
Port Number
Set the forwarding destination port number. Input a number in the range 1 to 65535.
When the [Delete All Settings] Button is Selected
This deletes all registered information for the selected address book entry. To delete
all registered information for the selected address book entry, select [Yes].
Important • Deleted information cannot be recovered.
Paper Tray Attributes
This feature is the same as the [Paper Tray Attributes] feature that can be selected from [Paper Tray
Settings] of [Common Settings]. For more information on this feature, refer to"Paper Tray Attributes"
(P.307).
To program this feature to be displayed on the [Setup Menu] screen, you must log in to the machine as
the system administrator. For more information on the setup procedure, refer to "Customize Paper
Supply Screen"(P.309).
To Next Page
Loading...
Need help?
General
