9 Paper and Other Media
268
Paper and Other Media
9
Paper Types
This section describes the kinds of paper available for this device.
Use of inappropriate paper may result in paper jams, cause reduced print quality,
malfunctions and other trouble. To make full and effect use of the machine's
performance, we recommend using only paper recommended by Fuji Xerox.
If you want to use paper not recommended by Fuji Xerox, contact our Customer
Support Center.
Important • The printed image may fade due to moisture such as water, rain or vapor. For more
information, contact our Customer Support Center.
Paper Type
Normal Paper (Printable Paper)
When using supplier paper (known as printable paper) for copies or printing, make sure
that it complies with the following specifications. However, it is recommended that you
use the standard paper types introduced on the next page, to achieve clear copy and
print results.
Important • Printing with paper that is a different type or size from the paper selected by the printer
driver, or printing from an unsupported paper tray can result in paper jams. To ensure
correct printing, select the correct paper size, paper type, and paper tray.
Note • GSM is a measure of the substance of paper expressed in grams per square.
• Ream weight is the weight of a 788
× 1,091 mm ream consisting of 1,000 sheets.
• When copying with a non-standard paper size from tray 5 (bypass), you must manually enter
the paper size. In addition, if you use a non-standard paper size often, you can preset the
size in the device. Then the preset size appears under [Standard Sizes] in the [Tray 5
(Bypass)] screen. For information about setup, refer to "Tray 5 (Bypass) - Paper Size
Defaults" (P.311).
Do not use conductive paper such as carbonic paper or coated paper. When paper
jam occurs, it may cause short-circuit and eventually a fire accident.
Paper tray Weight Loadable quantity
Paper tray 1 52 - 216g/m
2
Ream weight : 45 -
186kg
1,200 (FX P paper)
Paper tray 2 1,800 (FX P paper)
Paper tray 3 - 4 600 (FX P paper)
Tray 5 (Bypass) 52 - 253g/m
2
Ream weight : 45 -
217kg
Up to 27mm 280 (FX P
paper)
Paper tray 6 52 - 216g/m
2
Ream weight : 45 -
186kg
2,300 (FX P paper)
Paper tray 7
Interposer 60 - 220g/m
2
Ream weight : 52 -
172kg
200 (FX P paper)
To Next Page
Loading...
Need help?
General
