Scan Mode Settings
355
Setups
10
îš„More...
You can select from thirteen other sizes.
îš„Variable Size
You can enter any size. Set the width from 15 to 432 mm, and the height from 15 to 297
mm, in 1 mm increments.
Output Size Defaults
Set the sizes to be displayed at [Output Size] when selecting [Auto %] for scanning
documents at [Reduce/Enlarge] in the [Scan Options] screen.
Any output sizes can be assigned to output size buttons 1 to 8.
By setting the commonly used sizes, you can reduce the number of selection
operations for making a scan.
1 Select [Output Size Defaults].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 Select the setting value.
4 Select [Save].
îš„A/B Series Size
You can select from ten A and B series sizes.
îš„Inch Size
You can select from twelve inch series sizes.
îš„Others
You can select from thirteen other sizes.
To Next Page
Loading...
Need help?
General
