Checking Executing/Pending Jobs
401
Job Status
11
Checking Executing/Pending Jobs
This section describes how to check executing or pending jobs. In the status screen,
you can cancel jobs, or preferentially execute jobs.
1 Press the <Job Status> button.
2 Check the executing/pending job.
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
• Multiple jobs may turn to [In
Progress] when the document
is few, for example.
îš„Display Time
The estimated job completion time is displayed. The time is displayed either in the form
of Cumulative Time Required or Time Required.
Note • The estimated job completion time is not displayed during date processing.
The information to displayed can be changed. For more information about the settings, refer to
"Estimated Time for Single or All Jobs" (P.276)
3 To cancel or preferentially execute a job, select the job.
4 Select [Stop] or [Promote Job].
îš„Stop
Cancels the executing or pending job.
Note • You can also stop the copy job by pressing the <C> button or the <Clear All> button.
îš„Promote Job
Promotes a job to be run after the currently executing job.
A [ ] will be mark on the [Status] of a job set to [Promote Job].
To Next Page
Loading...
Need help?
General
