3 Copy
108
Copy
3
Tab Margin Shift (Copying on Tab Paper)
You can copy images from a document tab paper by specifying the copied position, so
that the image would be copied onto the tab.
Sizes of Tab paper can be copied are A4 , 8.5 to 11 inches.
Important • Select [Face down] in [Output Orientation] of [Output Format].
1 Select [Tab Margin Shift].
2 Select any item.
îš„Off
No copied on the Tab paper.
îš„Shift to Tab
Copy the image on the edge of the document to the only the tab part of the paper.
Specify the Shift Value to shift the image being on the edge of the document so that the
image would be copied onto the tab. (Enter the Shift Value to shift the image of the
document onto the tab for copying.) Only the image shifted can be copied.
îš„Shift All
Copy whole image of the document to the index paper.
Specify the [Shift Value] when you also wish to shift the image on the edge of the
document onto the tab for copying.
îš„Shift Value
Specify the position to shift within a range of 0 to 15mm.
îš„Paper Supply
Select paper tray for loading index paper. Tray 5 (bypass) is selected.
Note • When loading the tab paper in tray 5 (bypass), load the paper with the side to be copied
facing up and with the edge opposite to the tab to be fed first. When loading the tab paper in
tray 3 or 4, load the paper with the side to be copied facing down and with the edge opposite
to the tab aligning to the left side of the tray.
• You can load the tab paper in tray 3 to 4 only when selecting [Tabbed Stock 1 105-216g/
m2].
îš„Tab Stock Size
Select the size of index paper.
îš„Tab Stock Type
Select the quality of index paper.
To Next Page
Loading...
Need help?
General
