16 Specifications
562
Specifications
16
Settings in ESC/P Emulation Mode
The settings in the ESC/P mode menu are described under two headings: the basic
settings and extended settings.
Basic settings
Setting item
Item
number
Setting values
Paper tray 3 Selects the paper tray used for printing.
[0] : Auto
[1(Default): Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5 (bypass tray)
[6] : HCF1/HCF2 High
[7] : HCF2 Low
When feeding paper from the bypass tray, start printing by an operation
on this machine after the print data has been received. To end this
setting, change the "Tray 5 confirm indication" setting.
Important • When one of the "Trays 1 to 4 and 6 to 7" is selected, the paper
loaded in the selected paper tray determines the paper size, and the
"Paper Size" setting is not possible.
Note When "Auto" is selected, if the same sized paper is loaded in the
same orientation in more than one tray, the feed is in the sequence
tray 1g tray 2 g tray 3 g tray 4.If the same sized paper is loaded in
more than one tray in different orientations, the paper in landscape
orientation takes precedence.
• HCF1 and HCF2 are optional.
To Next Page
Loading...
Need help?
General
