Consumables
433
Machine Status
12
Consumables
You can check the status of consumables in the [Consumables] screen. The status of
consumables is shown as "Ready", "Replace Soon", or "Replace Now". For toner, the
amount is shown, from 0 to 100%.
The following describes the procedure for checking the status of consumables.
For information about how to replace consumables, refer to "Replacing Consumables" (P.456).
1 Press the <Machine Status>
button.
2 Select the [Consumables] tab.
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
Important • If using a partly consumed toner cartridge (for example a toner cartridge removed from
another DocuCentre 9000 unit or Document Centre 1100/900 unit), the indicated status
may not match the actual amount of consumable remaining. When replacing toner
cartridges, as far as possible the use of new items is recommended.
To Next Page
Loading...
Need help?
General
