10 Setups
336
Setups
10
Original Size Defaults
Set the original sizes that appear in [Original Size] in the [Scan Options] screen.
An original size is assigned to each of the eleven buttons other than [Auto Size Detect].
When frequently copying nonstandard size originals, by presetting a nonstandard size,
it is not necessary to enter the original size each time a copy is made.
1 Select [Original Size Defaults].
2 Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 Select the setting value.
4 Select [Save].
îš„A/B Series Size
You can select from ten A and B series sizes.
îš„Inch Size
You can select from twelve inch series sizes.
îš„Others
You can select from thirteen other sizes.
îš„Variable Size
You can enter any size. Set the width from 15 to 432 mm, and the height from 15 to 297
mm, in 1 mm increments.
To Next Page
Loading...
Need help?
General
