16 Specifications
608
Specifications
16
Simple Procedures
This section lists procedures the subject of frequently asked questions, particularly in
relation to the system settings.
Press the buttons in the sequence indicated by arrows.
Note • The default UserID setting is "11111."
Scan Settings
îš„Storing Address Numbers for Mail
<Log In/Out>J UserID input J[System Settings]J[Setup Menu]J[Address Book]
* If [Setup Menu] appears in the menu screen: [Setup Menu]J[Address Book]
For details, refer to "Address Book" (P.380).
îš„Printing the Address Book
<Machine Status>J[Billing Meter/Print Report]J[Print Report/List]J
J[Scan Mode Settings]J[Address Book]
For details, refer to "Address Book" (P.429).
îš„Allowing Different Sizes of Original to be Loaded by Default
<Log In/Out>J UserID input J[System Settings]J[System Settings]J
J[Scan Mode Settings]J[Scan Defaults]J[Mixed Size Originals]J[Yes]
For details, refer to "Mixed Size Originals" (P.353).
Copy Settings
îš„Allowing Different Sizes of Original to be Loaded by Default
<Log In/Out>J UserID input J[System Settings]J[System Settings]J
J[Copy Mode Settings]J[Copy Defaults]J[Mixed Size Originals]J[Yes]
For details, refer to "Mixed Size Originals" (P.328).
Common Function Settings
îš„Changing the UserID for System Administrator
<Log In/Out>J UserID input J[System Settings]J
J[System Administrator Settings]J[System Administrator Login ID]
*The default setting is "11111."
For details, refer to "System Administrator Login ID" (P.385).
îš„Changing the time for Switching to Power Saving Mode
<Log In/Out>J UserID input J[System Settings]J[System Settings]J
J[Common Settings]J[Machine Clock/Times]J[Auto Power Saver]
For details, refer to "Auto Power Saver" (P.301).
To Next Page
Loading...
Need help?
General
