Importing Scanned Data
265
Computer Operations
8
7 Click [Save this link].
To learn about operating details, click on
the bottom frame [Help] button and refer
to the online help.
Importing Using WebDAV Protocol
The following describes methods for using our application software such as
EasyOperator supporting WebDAV protocol to import a document stored on the
machine's mailbox.
You can import documents stored in the machine’s mailbox without using any
application software.
Since the WebDAV protocol uses a HTTP port, if HTTP communications is encrypted,
communications for importing scanned documents using the WebDAV protocol is also
encrypted.
To use the WebDAV protocol, the following ports must be activated at the machine in
advance.
-SNMP
- Internet Service (HTTP)
-SOAP
-WebDAV
Also, select UDP of transport protocol at SNMP port using CentreWare Internet
Services after activating the ports above.
For information about Network Settings, refer to the Network Administrator Guide. For
information about operation on application software, refer to your application software's
documentation.
This example describes how to use EasyOperator to import a document stored on the
machine's mailbox.
1 Click [Start] and select [Programs] > [Fuji Xerox] > [EasyOperator] > [EasyOperator].
2 Add the machine's mailbox to
[Mailbox] on the left frame of the
displayed window.
Add the machine's mailbox storing
documents you import.
For information about operation of adding
a mailbox, refer to the online help.
To Next Page
Loading...
Need help?
General
