Fuji Xerox DocuCentre 9000 User Manual

Registering/Deleting/Renaming Stored Programs
243
Stored Programming
7
1 Select [Store].
2 Select the number to register.
Note • Once a job is stored to a
button, it cannot be
overwritten.
• Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 Set the feature you wish to register.
Note • A tone is generated while registering to job memory.
You can change the volume of the sound that notifies of Stored Program registration. For information
about setup, refer to "Stored Programming Tone" (P.303).
4 Press the <Start> button or <Clear All> button.
[Not in Use] is displayed as a stored program name when you do not set. For information about setup,
refer to "Naming/Renaming a Stored Program" (P.245).
Registering Stored Program (Build Job)
Stored program for Build Job can record up to 40 features. In addition, up to 100 actions
can be registered with a stored program.
The following describes the procedure for registering actions with a Stored Program.
Important • A stored program, which is registered, may not be called out correctly if following operations
are launched after the stored program registration.
• When changing default settings for set numbering feature after a stored program is
registered as the set numbering feature is registered to the stored program.
• When features registered to the stored program does not work after default values are
changed by system settings.
• When the password for the object of mailbox operation differs from the time of the stored
program registration at the stored program operating mailbox.
• When registering the paper size and paper quality of bypass to the selecting the stored
program, register both the size and quality. Only registering the paper size or paper quality
may not call for the stored program correctly.
• If launching the following operations while a stored program is being registered, registering a
stored program and the stored program performance are not working well.
• Removing and setting a paper tray.
• Loading paper into bypass.
• Removing paper loaded in bypass.
Note • If the <Interrupt> button is pressed, if the Auto Reset feature causes a time-out, or if a popup
window (paper jam, etc.) appears, then the Stored Program record operation is cancelled.

Fuji Xerox DocuCentre 9000 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre 9000
Category	All in One Printer
Language	English