16 Specifications
578
Specifications
16
Layout 405 This section describes the layout when printing.
Note • The setting of this item is only valid when [Print Processing Mode] is
set to [PDF Bridge].
[0] (default): Auto Reduce/Enlarge
[1] : Booklet
[2] : Two-up
[3] : Four-up
[4] : 100% (actual size)
The Auto Reduce/Enlarge setting automatically prints with the
magnification adjusted to fit the paper size being printed. It automatically
selects A4 or letter size from the original size in the PDF file, and prints
accordingly.
The Booklet setting performs duplex printing with the page imposition
such that, according to the pagination of the PDF file to be printed, the
result is a booklet. Depending on the pagination, however, a booklet print
may not always be possible. In this case, it is printed at setting [0] (Auto
Reduce/Enlarge).
Note • If there is no duplex feature, the document is printed 1 sided.
• When [Paper Size] is set to [A4], printing is on A4 size paper.
• When [Paper Size] is set to [Auto], printing is on A3 or A4 paper.
The Two-up setting prints two pages on each sheet of paper. When Two-
up is selected, the paper size is fixed at A4.
The Four-up setting prints four pages on each sheet of paper. When
Four-up is selected, the paper size is fixed at A4.
Paper size 406 Sets the paper size for printing.
[0](default): Auto
[1] : A4
The Auto setting automatically determines the paper size, according to
the original size of the PDF file to be printed and settings.
Color mode 407 Selects color printing or black and white printing.
[0] (default): Auto
[1] : Black and white
The Auto setting automatically determines for each page of the original
whether it is color or black and white. If colors other than black and white
are used, then it is printed in color, and if black and white only are used,
black and white printing is used.
Print processing
mode
408 When using the PDF direct print feature, selects the mode for print
processing.
[0] (default): PDF Bridge
[1] : PS
PDF Bridge processes the PDF using the Fuji Xerox PDF direct print
feature.
PS processes the PDF using the Adobe PostScript feature.
Note • This setting appears only when the optional PostScript 3 kit is
installed.
• The printed results may be different when [PDF Bridge] is selected or
when [PS] is selected.
• When [PS] is selected, the setting in [Layout] is disabled.
Setting item
Item
number
Setting values
To Next Page
Loading...
Need help?
General
