Fujitsu 6010N - fi - Document Scanner

4.7 Using the Network Settings Menus
fi-6010N Network Scanner Operator's Guide 93
4
4.7.4 Setting the DNS Server
A primary DNS and secondary DNS can be set.
1. Select the [Network Settings] tab on the top menu.
2. Select the [DNS Server] tab on the left side menu.
 The "DNS Server" screen appears.
3. Enter the following numerical addresses:
z Primary DNS
z Secondary DNS
If a DNS server setting is not required, enter "0.0.0.0".
4. Select whether or not to dynamically update the DNS.
The default setting is [Off].
Select the [On] button to enable DNS dynamic update.
Select the [Off] button to disable DNS dynamic update.