4.7 Using the Network Settings Menus
fi-6010N Network Scanner Operator's Guide 145
4
4.7.15 Setting the SharePoint Folders
A list of SharePoint folders may be set as "Scan to SharePoint" targets for scanned data.
1. Select the [Network Settings] tab on the top menu.
2. Select the [SharePoint Folder] tab on the left side menu.
 The "SharePoint Folder" screen appears.
3. The "Scan to SharePoint" option determines whether users are allowed to save
scanned data in SharePoint folders.
The default setting is [Off].
Selecting [On] allows scanned data to be saved in a SharePoint folder.
Selecting [Off] prevents scanned data from being saved in a SharePoint folder.
4. Specify a SharePoint server site URL in the "URL" field.
Either of the following formats may be used:
z Not using SSL
http://SharePoint_server_IP_address, host_name, or FQDN[:port_number]/[site_name]
Port 80 is used if the port number is skipped.
z Using SSL
https://SharePoint_server_IP_address, host_name, or FQDN[:port_number]/[site_name]
Port 443 is used if the port number is skipped.
If a site name is not entered, all sites under the base URL are shown.
URLs up to 512 characters long may be entered.
Pressing produces a list of the (up to) ten most recently specified URLs, allowing easy
reselection of URLs.
To Next Page
Loading...
Need help?
General