4.11 Setting Job Features
fi-6010N Network Scanner Operator's Guide 197
4
■ Cloning a job sequence
This section describes how to clone a job sequence.
1. Select the [Job Sequences] tab.
The "Jobs List" window appears.
2. Select the job sequence to be cloned.
3. Select the [Clone] button.
The "Job Details" window appears.
4. Clone the detailed job sequence settings.
5. Select the [OK] button.
A job sequence is added to the "Jobs List" window.
■ Editing a job sequence
This section describes how to edit a job sequence.
1. Select the [Job Sequences] tab.
The "Jobs List" window appears.
2. Select the job sequence to be edited.
3. Select the [Edit] button.
The "Job Details" window appears.
4. Edit the detailed job sequence settings.
5. Select the [OK] button.
The settings of the job sequence are changed.
To Next Page
Loading...
