fi-6010N Network Scanner Operator's Guide 601
E
E.3.4 Backup/Restore Command Messages
Backup/restore command messages which may appear during central admin operations can be
arranged into the following two categories:
z Information
z Error
Backup/restore command messages will be shown on the command prompt.
â– Information
â– Error
Code Message Action
0A040001 Starting backup. No action required.
0A040002 Finishing backup.
0A040003 Starting restore.
0A040004 Finishing restore.
Code Message Action
7A040010 iScanner Central Admin is not
installed.
Central Admin Server software is not
installed.
Try again in a Central Admin Server that
has been correctly installed.
7A040011 Backup folder has not been
specified.
The backup file name is not specified in
the parameters of the backup command and
restore command.
Specify the backup file, and try again.
7A040012 Backup folder does not exist. Specify the backup folder that was
specified with the backup command, and
try again.
Or, check the read privilege for the
specified backup folder.
7A040013 Backup folder contents are
invalid.
The backup folder specified in the
parameter for the restore command is not a
backup folder for Central Admin.
Specify the Central Admin backup folder
and try again.
To Next Page
Loading...
Need help?
General