282
â– Scanner Operating Status
z Online (In use)
Shows the number of scanners that are currently operating. The number of scanners with
logged in users are shown in ( ).
z Offline
Shows the number of scanners that are currently turned off or in standby mode.
z Unreported
Shows the number of scanners whose operating status is not reported.
z Consumable Alerts
Shows the number of scanners whose consumable parts are soon to pass or have passed
their rated lifetime already.
z Error
Shows the number of scanners in which an error has occurred. The error mark ( ) is
shown to indicate the scanner with an error.
Error Shown if the following errors occur in a scanner.
z Scanner monitoring error (messages with an error code
from 81000001 to 81000012)
For details of errors, refer to "E.1.3 Alert Monitor System
Log Messages" (page 522).
z Unexpected error (messages with the error code
81001001 or 81001002)
For details of errors, refer to "E.1.2 System Log Mes-
sages" (page 516).
Consumable
Alerts
Shown when a consumable part is near or has reached its
replacement time.
Immediately after the Central Admin Server starts up, the operating status of
the registered scanners is shown as "Unreported". In this case, the status of
each scanner will be updated when one of the following occurs:
z A scanner is logged in/out
z The scanner power is turned on, or it is resumed from standby mode
z The scanner power is turned off, or it is set to standby mode
Icon/Mark Status Description
To Next Page
Loading...
Need help?
General