5.7 Setting Scanner Configuration
fi-6010N Network Scanner Operator's Guide 257
5
■ [Import Config] button
This button opens the "Import Scanner Config" window to allow the import of pre-created scanner
configuration data from a file. Such a scanner configuration file may contain data for several scan-
ners, all of whose configurations are then changed at once.
Details of the importable data (settings) allowed in a scanner configuration file are given in "B.2.1
Scanner Configuration File Format (for Importing)" (page 489). Note that only those settings
detailed as being importable may be imported.
z Scanner Config File
Select the [Browse] button and specify the scanner configuration file to be imported.
z [Import] button
Imports the entered scanner configuration file and returns to the "Scanner Config List" win-
dow.
z [Cancel] button
Returns to the "Scanner Config List" window without confirming the entered contents.
z Importing a scanner configuration file that contains zero scanner entries
will cause all of the existing scanner configuration information to be
deleted.
z The imported scanner configuration file overwrites the current scanner
configuration.
z If the imported scanner configuration information contains the same MAC
address or scanner name as in the existing scanner configuration infor-
mation, the MAC address or the scanner name will be recognized as
already existing. This is determined in the order of MAC address, scan-
ner name. In this case, on the table shown in "5.7 Setting Scanner Con-
figuration" (page 254), items in the "Configuration from file" column
marked "Yes" are replaced, and those marked with "—" are left as they
are.
z If the same MAC address or scanner name does not exist, the imported
scanner configuration information will be added.
To Next Page
Loading...
