Fujitsu 6010N - fi - Document Scanner - Enabling;Disabling the Message Screen

6
fi-6010N Network Scanner Operator's Guide 417
6.14 Processing a Job
6.14.1 Enabling/Disabling the Message Screen
You can select whether to show the "Message Screen" for checking the contents of a job.
This section uses an example where buttons from [Job1] to [Job6] have been set.
1. On the "Job Menu" screen, press the [Message Screen] button.
 If the [Message Screen] button is set to "Off", pressing the button will change it to "On",
and vice-versa.
ATTENTION
When the [Message Screen] button is disabled, it is not possible to select
whether or not to show the "Message Screen".