Fujitsu 6010N - fi - Document Scanner

4.5 iScanner Administrator Login: via the Admin Tool
fi-6010N Network Scanner Operator's Guide 53
4
4.5 iScanner Administrator Login: via the Admin Tool
The Admin Tool can be set up to manage the scanner via a computer.
This section explains how to login using the Admin Tool.
ATTENTION
z If the normal screen display does not appear (for example: an "X" mark
appears), wait for a few minutes and try again. If the problem still occurs,
contact your FUJITSU scanner dealer or an authorized FUJITSU scanner
service provider.
z If a button is rapidly pressed many times in succession, a "The page can-
not be displayed" message may appear. Selecting another tab or reloading
the page will refresh the screen.
HINT
z For details about setting up to manage the scanner via a computer, refer to
"1.4.1 Requirements for Admin Tool" (page 12).
z The user name and initial password for the administrator are as follows:
User Name: admin
Password: password
z The scanner setup can be configured by one user.
z Session timeout time is 20 minutes (fixed). The session timeout time is
extended by a further 20 minutes for the following:
z when a tab on the top menu or left side menu is pressed
z when the [OK] button is pressed