6
fi-6010N Network Scanner Operator's Guide 327
6.4 Sending the Scanned Data by e-Mail
6.4.3 Editing an e-Mail Target in the e-Mail Address Book
The following explains how to edit an e-mail address or distribution list stored in your My List. e-
Mail targets stored in the LDAP list cannot be edited.
1. Open the "e-Mail Address Book" screen in either of the following ways.
z On the "Send e-Mail" screen, press to the right of an e-mail address field.
z On the "Main Menu" or "Job Menu" screen, press the [Maintenance] button, then on the
"Maintenance" screen, press the [Edit e-Mail Address] button. For details, refer to "6.13
Maintenance" (page 412).
2. Select the [My List] tab.
3. Select the e-mail address or distribution list to be edited.
4. Press the [Edit] button.
The "Edit e-Mail Address" screen appears.
5. Edit the details of the selected e-mail target.
z For e-mail addresses
Edit the "First Name", "Last Name", and "e-Mail Address".
Up to 64 characters can be specified for "First Name" and "Last Name". "First Name" and
"Last Name" can be skipped.
For more details about e-mail address setting values, refer to "B.1 e-Mail Address Setting
Values" (page 488).
To Next Page
Loading...
