326
z For distribution lists
On the [Distribution List] tab, enter the "List Name" and "e-Mail Addresses" to be added to
the distribution list.
Up to 64 characters can be specified for "List Name". The following symbols cannot be
used.
; @
For more details about e-mail address setting values, refer to "B.1 e-Mail Address Setting
Values" (page 488).
A distribution list can contain up to 100 e-mail addresses. Multiple addresses must be sepa-
rated using semi-colons (";").
e-Mail addresses can be selected from the e-mail address book, which can be accessed by
pressing .
5. Press the [OK] button.
The e-mail address or distribution list is added to your My List address book.
To Next Page
Loading...
