Fujitsu 6010N - fi - Document Scanner

6
fi-6010N Network Scanner Operator's Guide 349
6.6 Printing the Scanned Data
6.6.2 Positioning
Set the print position of the scanned data.
The setting selected here will be used every time the user prints a document.
1. Press the [Positioning] button.
 The "Positioning" screen appears.
2. Select the print positioning of the data.
By default, this is "Center".
Button Scaling Control Point
Center Shrink to Fit Uses the center point of the area available for print-
ing as a control point.
100% Uses the center point of the sheet as a control
point.
Available Area
for Printing
Control Point
Center
Center
Control Point
A
vailable Area
for Printing