272
â– Registered Scanner Settings
z Settings Group
Displays the settings group name selected in the "Settings Groups" list.
z Current Release
Displays the release date of the currently available scanner settings.
Selecting the [Cancel] button cancels release of the scanner settings.
â– Upload & Release a New Set of Scanner Settings
Uploads scanner settings and issues an update call as needed.
The new set of scanner settings will be released, and applied to the scanners when one of the fol-
lowing occurs:
z Scanner is started, or resumed from the standby mode
z Scanner is logged out
z Scanner is notified of any update modules
z Scanner has an automatic update scheduled
Updates can be applied to the scanners that are in power-off or standby mode using Wake-On-
LAN. However, if the update is released while logged in to a scanner, the update will be applied
after logged out.
If scanner settings are already available, the scanner settings are replaced.
If the scanner settings are canceled, checking or changing the settings
contents becomes difficult. Also, editing and viewing of the network print-
ers/folders setting contents on the Job Sequence "Job Mode Settings"
screen, may not be possible. For more details, refer to "Create & Release
a New Set of Job Mode Settings" (page 276).
To Next Page
Loading...
Need help?
General