276
■ Create & Release a New Set of Job Mode Settings
Creates and releases a new set of job mode settings.
After registering a new set of job mode settings, the job mode settings are replaced.
z [Job Mode Settings] button
The button displays the "Job Mode Settings" window to configure job mode settings.
The contents of the last configured job mode settings are shown.
z [Job Sequences] tab
The setting items are the same as those set in the [Job Sequences] tab in the job mode set-
tings menu in the window for administrator operations. For details, refer to "4.11.2 Setting
a Job Sequence" (page 185).
To set "Print" or "Save" for a job sequence, a network printer or network folder must be
previously added on the "Edit Scanner Settings" screen. The job sequences and "Edit Scan-
ner Settings" screen settings are related in the following way.
z The network printers shown on the "Printer List" window when "Print" is selected as a
job item, are the network printers set on the "Edit Scanner Settings" screen.
z The network folders shown on the "Folder List" window when "Save" is selected as a
job item, are the network folders set on the "Edit Scanner Settings" screen.
z [Job Menus] tab
The setting items are the same as those set in the [Job Menus] tab in the job mode settings
menu in the window for administrator operations. For details, refer to "4.11.3 Setting a Job
Menu" (page 203).
z [Job Groups] tab
The setting items are the same as those set in the [Job Groups] tab in the job mode settings
menu, in the window for administrator operations. For details, refer to "4.11.4 Setting a Job
Group" (page 210).
z [Close] button
Registers the entered job mode settings and returns to the "Job Mode Settings" window.
To Next Page
Loading...
