4.11 Setting Job Features
fi-6010N Network Scanner Operator's Guide 199
4
â– Filtering the LDAP List
This section describes how to filter the LDAP List on the "LDAP List" window.
1. In the [User Name] drop-down list box, select the display format for the user names
shown on the user name/e-mail address list.
2. Enter the LDAP server and character string to be used for LDAP searches in the
"Search Base" field.
The LDAP entries under the character string entered here will become the search target.
This may be up to 520 characters long.
3. In the [Search Position] drop-down list box, select the filtering method.
The default setting is [Head (abc...)].
4. Enter the filter character string.
Enter the user name and e-mail address to be filtered, in whole or in part.
Up to 256 characters may be entered for both user names and e-mail addresses.
If both a user name and e-mail address is entered, data containing either of them are searched
as "AND Search".
Search
Position
Description
Example
Target
Search Result
Head
(abc...)
Filtered by words that start
with the character string
entered in Step 4.
abc abc, abc1, abcd, ...
Anywhere
(...abc...)
Filtered by words that include
the character string entered in
Step 4.
abc abc, abc1, xabc, xabcy, ...
Tail
(...abc)
Filtered by words that end with
the character string entered in
Step 4.
abc abc, 1abc, xabc, ...
To Next Page
Loading...
Need help?
General