Fujitsu 6010N - fi - Document Scanner

6
fi-6010N Network Scanner Operator's Guide 351
6.6 Printing the Scanned Data
6.6.3 Simplex/Duplex
Set whether to print on one side (simplex mode) or both sides (duplex mode).
1. Press the [Simplex/Duplex] button.
 The "Simplex/Duplex" screen appears.
2. Select a print mode.
Initially, this setting is "Duplex (Long Edge)".
"Long Edge" means that sheets are flipped vertically for printing.
"Short Edge" means that sheets are flipped horizontally for printing.
 This returns you to the "Print" screen.
The selected mode is displayed to the right of the [Simplex/Duplex] button.
ATTENTION
According to the printer, settings from the printers properties screen
may be used instead.