192
8. If [Fax] is selected for the job item in Step 6, perform settings related to sending a fax.
For details about setting values, refer to "6.5 Sending the Scanned Data by Fax" (page 330).
If the [e-Mail address of user] option button is selected for "Notification To (Sender's e-Mail
Address)", the e-mail address of the logged in user is used when a job sequence is per-
formed. However, in the following cases, an error will occur when a job sequence is per-
formed.
z If the currently logged in user does not have an e-mail address
z If logged in with the guest account
Select the [Browse] button to set a different e-mail address from the
"LDAP List" window.
Settings entered in the following screen are shown.
z For Admin Tool
"e-Mail LDAP Server" screen
z For Central Admin Console
"LDAP Server" section on the "Central Admin Server Settings" screen
However, whether or not SSL is used, depends on each LDAP server set-
tings.
For more details about how to filter the LDAP List, refer to "Filtering the
LDAP List" (page 199).
To Next Page
Loading...
