4.11 Setting Job Features
fi-6010N Network Scanner Operator's Guide 207
4
13. In the Scan Viewer list, set whether to show the [Scan Viewer] button on the "Job
Menu" screen.
z If [Decide per-Job] is selected
The [Scan Viewer] button on the "Job Menu" screen is enabled, and it is possible to select
whether or not to show the "Scan Viewer" when scanning, according to each job.
z If [Always display] is selected
The [Scan Viewer] button on the "Job Menu" screen is disabled, and the "Scan Viewer" is
shown when scanning.
z If [Never display] is selected
The [Scan Viewer] button on the "Job Menu" screen is disabled, and the "Scan Viewer" is
not shown when scanning.
14. Select the [OK] button.
A job menu is added to the "Job Menus List" window.
To Next Page
Loading...
