Fujitsu 6010N - fi - Document Scanner

4.11 Setting Job Features
fi-6010N Network Scanner Operator's Guide 217
4
3. Press the [Edit] button.
 The "Settings For Selected Group(s)" area becomes active.
4. Select the [Select] button.
 The "Select Job Menu" window appears.
5. Select a job menu.
6. Select the [OK] button.
 A job menu is set on the "Settings For Selected Group(s)" area.
7. Set whether or not to display the "Multi-Function Main Menu".
z If [Both Job & Multi-Function] is selected
The menu to appear first after a regular user login can be set on the "Initial Post-Login
Menu".
z If the [Multi-Function Menu] option button is selected
The Multi-Function Main Menu appears first after a regular user login.
z If the [Job Menu] option button is selected
The Job Menu appears first after a regular user login.
The user can use both the Multi-Function Main Menu (refer to "3.2 Required Scanner
Function Settings" (page33)) and Job Menu (refer to "4.11.3 Setting a Job Menu"
(page203)) by pressing the [Menu Mode] button.
z If [Job Only] is selected
The Multi-function Main Menu is not shown. The Job Menu always appears after a regular
user login.
The user cannot switch between the Multi-Function Main Menu and Job Menu by pressing
the [Menu Mode] button.
8. Select the [OK] button.
 A job menu is assigned to users who are not included in a job group.