312
Login is not possible if the Active Directory account option is "User must change password at next
logon". Contact an administrator to change a password, and then try logging in.
1. Push the startup button.
The "Login" screen appears.
2. Enter a "User Name" and "Password" that has been stored in the LDAP server.
z When using the scanner without an LDAP server, enter the following user name
and password. For details about the LDAP server, refer to "LDAP Server" (page
17).
User Name: guest
Password: guest
However, this cannot be used if login with the guest account is disabled.
z For details about automatic login or enabling login with the guest account, refer
to "4.6.7 Setting the Login Method" (page 68).
z Only one administrator or user can login to the scanner at any one time.
To Next Page
Loading...
