342
7. Press the [Scan] button.
When [Scan Viewer] is Off, this will be a [Scan&Print] button.
 Scanning starts.
Each page is briefly shown on the screen as it is scanned.
The maximum number of pages that can be scanned is 100.
When [Blank Page Skip] is enabled, the number of scanned pages excluding skipped
blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the maximum
number of scanned pages is reached.
When the scan has completed, the "Scan Viewer" screen opens.
For more details about the "Scan Viewer" screen, refer to "6.11 Editing the Scanned Data
in the Scan Viewer" (page 405).
8. Check the scanned data.
For more details about the "Scan Viewer" screen, refer to "6.11 Editing the Scanned Data in
the Scan Viewer" (page 405).
z [Scan Viewer] is initially "On".
z When the [Scan&Print] button is pressed (when [Scan Viewer] is "Off"),
after the last page is displayed on the "Scanning" screen, the scan data is
printed, and the touch panel screen returns to the "Main Menu". For
details, refer to "6.10 Enabling/Disabling the Scan Viewer" (page 402).
z Current user printing privileges for the specified printer are checked
before printing. When printing privileges are being checked, data may be
spooled temporarily.
To Next Page
Loading...
Need help?
General